Warranty
30 RGB LEDs per meter (9 LEDs per foot)
Model # RF5050030-V2RGB
Ultra thin and flexible, RibbonFlex Pro Custom Color RGB LED
Tape Light is easy to install in straight, curved and irregular
spaces – offering virtually limitless design and installation
possibilities. With red, green and blue LED chipsets, RGB LED
lighting can produce a near endless array of colors, plus shades of
white, making it exceptionally versatile for creative accent lighting.
Please read completely before installing.
These guidelines will help you to understand how LED tape lighting can be
configured, cut to size, connected, and installed so you can successfully
design your own project-specific LED lighting layout.
Installing tape lighting is an easy DIY project, however, basic wiring skills
such as stripping, splicing, extending, and connecting wires are required.
This RGB LED tape lighting requires a 12V DC power supply and an RGB
color controller, available separately. An RGB LED Signal Repeater may be
required for longer length runs over 32 feet.
For help and advice with installations and to learn more about how to install
larger RGB application projects email support@armacostlighting.com.
IMPORTANT
When making any connections or cutting the RGB LED tape light,
make sure all power is disconnected. A short circuit will occur if any of
the energized White, Red, Green, or Blue wires come in contact with
each other which can permanently damage your RGB color controller.
Never connect tape light directly to 120-volt household power
Do not power LED tape while coiled on reel, as the LEDs will overheat.
The mounting surface will act as a heat sink to dissipate heat
Do not stare directly into the LED lights when illuminated
Never connect more than one power supply or color controller to a run
of LED lighting
Always use the +12V/G/R/B indicators printed on the tape light to
maintain polarity and correct color sequencing
Do not install this product in areas that are susceptible to direct
exposure to the elements
Use only insulated staples, plastic ties, or wire support clips to secure
cords and wires
Route and secure wires so they will not be pinched or damaged
Use properly certified CL2 or better cabling for wire runs inside walls
Do not install Class 2 low voltage wiring in the same runs as AC main
power. If AC and low voltage wires cross, keep them at 90-degree angles
All wiring must be in accordance with national and local electrical codes,
low voltage Class 2 circuit. If you are unclear as to how to install and wire
this product, contact a qualified professional.
Planning
RibbonFlex Pro RGB LED lighting is designed for indirect lighting
applications. The LEDs themselves are not intended to be seen directly
by the eye. Every installation is unique and the illumination effects are
personal preference. Installation location, wall colors, mounting angle, and
the light’s reflection off of walls, surfaces and objects will affect the final
lighting appearance. Subtle adjustments to the positioning and angle of
the LED tape can greatly impact the overall lighting effect.
Installation considerations
Where will you locate your power supply and RGB controller?
How will you switch your LED lighting on and off?
What is the best layout configuration for your installation?
What are the best ways to mount the tape lighting?
How will you cut, connect, and conceal the wires to your lighting?
RibbonFlex Pro
®
LED Accent Lighting
Custom Color RGB LED Tape Light
Choose an RGB color controller
A color controller is required for RibbonFlex Pro RGB LED lighting.
RGB color controllers blend the red, green, and blue light from the LED
chipsets allowing you to create custom colors and color-changing effects.
The color controller will also work as a dimmer and function as an on/off
switch. A wireless wall switch is also available. For current product
information on RGB color controllers, visit armacostlighting.com.
Choose a power supply
Power supplies come in various sizes with different wattages and are often
referred to as transformers, AC/DC adaptors, or LED drivers. RibbonFlex
Pro LED tape operates on low voltage and requires a power supply to
convert 120-volt household AC power to 12-volt DC power.
Never connect RibbonFlex LED Tape Lighting directly to 120-volt
household power
Only use RibbonFlex with Armacost Lighting approved LED drivers
and power supplies. Using other power supplies will void warranty
TYPICAL CONNECTION SCENARIOS
SWITCHED
AC OUTLET
12V DC
POWER SUPPLY
WALL
SWITCH
RGB
CONTROLLER
120V
AC OUTLET
12V DC
POWER SUPPLY
RGB
CONTROLLER
12V BATTERY
FUSE
PROTECTION
12V SWITCH
RGB
CONTROLLER
120V
AC OUTLET
12V DC
POWER SUPPLY
WIRELESS
TOUCHPAD FOR
RGB CONTROLLER
WIRELESS RGB
CONTROLLER
RECEIVER
120V
AC OUTLET
12V DC
POWER SUPPLY
SMARTPHONE
WITH WI-FI
MyLED APP
WI-FI LED
LIGHTING
CONTROLLER
Interior RV and boat applications can be powered directly by 12V battery
Power supply location and voltage drop
The shorter the wire is between the power supply, the RGB controller and
the tape lighting, the brighter and more consistent the color will be – do
not coil extra wire. If the RGB LEDs farthest from the power supply appear
dim or you see a color shift, it is due to voltage drop. Voltage drop only
becomes undesirable if you notice the brightness or color in one area of
your lighting is objectionably different than in another area. As a practical
approach, test your LED lighting prior to final installation. If voltage drop
appears to be an issue use heavier gauge wire, power tape light from both
ends, or use shorter length of lighting (see Typical Configurations).
To learn more, visit armacostlighting.com/installation for an easy-to-use
online voltage drop calculator.
1