Manual

CHAPTER II
OPERATING INSTRUCTIONS
Section I
2-1.
SERI’ICE UPON RECEIPT OF MATERIAL.
“-2. GENERAL.
2-3.
Upon receipt of the rifle, it \vill be inspected by the responsible individual to determine
that it has not been damaged in-transit and is in proper condition for service.
2-4. All basic issue items, replacement parts, tools, and equipment checked as invoiced.
2-5. A record will be made of all missing parts, tools, and equipment and any other deficiencies
in the shipment. Corrective action will be initiated by the responsible individual.
2-6. SERVICES.
2-7. The rifle will be unpacked, all foreign matter removed from the surfaces of the weapon,
assuring all components are clean. If necessary, the bore will be wiped clean by pushing clean,
dry patches through the barrel, from the chamber to the muzzle.
* 2-x.
The rifle will be visually inspected for function to include proper seating of the magazine.
“-9. BIPOD.
2-l 0.
Foreign matter will be removed from the biped and case, as necessary.
2-11.
The bipod will be attached to the rifle to assure that the bipod is undamaged, suitable
for use.
Section 2
Z-12. CONTROLS.
2-13. Refer to (Figure 2-l) for Controls and Operation of Controls.
Remove Magozlne
Figure 2-l
Clearing Rifle, inspect Chamber
Place Selector Lever in Safe Posit07