Operation Manual
31
5. Reset: press B (the three chronograph hands are returned to their zero positions).
NOTE: The accumulation of the timing can be continued by pressing A (Restart / Stop,
Restart / Stop, …).
Chronograph: Intermediate or interval timing
1. Start: press A (start timing).
2. Display interval: press B (e.g. 10 minutes 10 seconds, timing continues in the
background).
3. Making up the measured time: press B (the 3 chronograph hands are quickly
advanced to the ongoing measured time).
NOTE: Further intervals or intermediates can be displayed by pressing B (display interval /
make up measured time, ...).
4. Stop:pressA(naltimeisdisplayed).
5. Reset: press B (the 3 chronograph hands are returned to their zero position).
Adjusting the chronograph hands to zero position
One or several chronograph hands are not in their correct zero positions and have to
be adjusted (e.g. following a battery change).
1. Pull the crown out to position 3 (all 3 chronograph hands are in their correct or
incorrect zero position).
2. Keep A and B depressed simultaneously for at least 2 seconds (the center stop-
second rotates by 360°, corrective mode is activated).
3. Press A to single step the center stop-second hand. Press and hold A to advance the
center stop-second hand quickly. Press B to adjust the next hand.
4. Press A to single step the hour counter hand. Press and hold A to advance the hour
counter hand quickly. Press B to adjust the next hand.
5. Press A to single step the minute counter hand. Press and hold A to advance the
minute counter hand quickly.
6. Return crown to position 1 (termination of the chronograph hands adjustment).