Operation Manual

33
DIGITAL BJT001
Normal Time Display
1. Press A to display month/date.
2. Press A twice (or once if date is displayed)
to display seconds. Press A again to return to
Normal Time Display.
Time and Date Setting
1. From Normal Time Display, press B twice to enter setting mode; month will be
displayed.
2. Press A to increase value.
3. Press B to set and advance to next setting.
4. Setting sequence is: month, date, hour, minute.
5. Press B to exit setting mode.
NOTE: Colon will flash between hour and minutes in Normal Time Display to indicate
watch is active.
B
A
Chronograph Operation
1. Push A to start/stop the chronograph.
2. Push B to reset the chronograph.
3. Although the 1/20 second hand stops when the measurement time is over 30
seconds, the watch continues measuring the elapsed time. Exact time elapsed is
indicated when the measurement is stopped by pressing button A.
4. If B is pressed again after chronograph is reset, the 1/20 second hand changes to
measure each second.