Technical data

3.5.2. OPERATION IN RAINY OR HUMID CONDITIONS

CAUTION:

Operation in rainy or humid conditions can cause corrosion and deterioration of the MUNVM,

unless the below precautions are observed.

(1) Install the demist shield (paragraph 3.3.4).

(2) Keep the carrying case and the shipping and storage case closed unless removing or replacing

items.

(3) Dry the monocular, mounts, and accessories after exposure to rain or high humidity, and always

before storage. This will prevent mildew from forming in the case.

(4) Do not store the monocular in a wet carrying case or in a wet shipping and storage case.

3.5.3. OPERATION IN SALT WATER AREAS

After exposure to salt water, clean the MUNVM (paragraph 4.3.1).

3.5.4. OPERATION IN NUCLEAR, BIOLOGICAL AND CHEMICAL ENVIRON

MENTS

WARNING:

Never reuse an eyecup or eyeguard that has been contaminated by hazardous materials or

environments. Contaminated eyecups and eyeguards must be replaced.

(1) Decontamination – Always wear a protective mask when decontaminating the MUNVM.

(2) Hardness – Do not use the DS-2 to decontaminate the MUNVM. To decontaminate the device, use

5% sodium hypochlorite and rinse with hot (158°F) soapy water.

Shop for Armasight products online at:

1.877.766.5412