User's Manual

41
iP1 SmartSystemiP1 SmartSystem
4.5 Preparing the weapon for use
4.5.1 Clean the barrel of the weapon
Before firing, the barrel must be cleaned to remove dirt, oil and residues. The slide of the weapon
can be removed for cleaning (see Chapter 5.2).
Use commercially available cleansing agents for cleaning the barrel.
If necessary, install the slide again and carry out a function test as described in Chapter 4.1.2.
INFO
At very low temperatures, condensation can freeze on the weapon and impair the function.
¾ Do not expose the weapon to warm and cold air in quick succession to avoid the forma-
tion of condensation.
4.5.2 Filling the magazine
DANGER! Risk of injury!
If incorrectly handled, cartridges can pose serious hazards for the health of the user and for
the proper function of the weapon.
¾ Observe the safety precautions for the handling of ammunition. See Chapter 2.2.
The magazine is design to hold max. 10 cartridges of calibre .22lr.
Loading of the magazine can be simplified by also pulling back the slide.
1.
2.
CLICK
Release and remove
the magazine.
Grip the magazine,
pull the slide at the
same time when
filling.
Insert the ammunition
as shown, max. 10x
calibre .22lr.
Push in the magazine
completely.