User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety Precautions
- 3 Description
- 4 Handling
- 4.1 Checking the weapon system (weapon and wrist watch)
- 4.2 Adapting the weapon to the user
- 4.3 Inserting the batteries
- 4.4 The wrist watch functions
- 4.5 Preparing the weapon for use
- 4.6 Aiming and firing
- 5 Cleaning
- 6 Malfunctions and Remedies
- 7 Storage
- 8 Transport/Shipment
- 9 Disposal
- 10 Spare Parts and Repairs
47
iP1 SmartSystemiP1 SmartSystem
5 Cleaning
5.1 General notes on cleaning
Regular cleaning and care of the weapon enhances not only the appearance of the weapon, but
also and more importantly the safety of the user.
• The service life is prolonged due to the reduced wear.
• The functional safety is assured.
• Hazards and accidents are avoided.
Therefore clean the weapon after every firing session and at intervals of 500 shots as described in
the following chapters.
5.2 Dismantling the weapon
CAUTION! Risk of damage and injury!
Improper handling during dismantling and assembly of the weapon can result in malfunc-
tions and possibly even unserviceability of the weapon.
¾ Strictly observe the instructions given during dismantling and assembly of the weapon.
¾ Dismantling of the weapon beyond the extent described here may only be carried out by
authorised personnel.
5.2.1 Safety check
Before dismantling the weapon, carry out a safety check as described in Chapter 4.1.1. During the
safety check, the magazine is released and removed.