User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety Precautions
- 3 Description
- 4 Handling
- 4.1 Checking the weapon system (weapon and wrist watch)
- 4.2 Adapting the weapon to the user
- 4.3 Inserting the batteries
- 4.4 The wrist watch functions
- 4.5 Preparing the weapon for use
- 4.6 Aiming and firing
- 5 Cleaning
- 6 Malfunctions and Remedies
- 7 Storage
- 8 Transport/Shipment
- 9 Disposal
- 10 Spare Parts and Repairs
50
iP1 SmartSystemiP1 SmartSystem
5.4 Assembling the weapon
Push the recoil spring
onto the barrel.
Push the slide over the
spring and pull back
over the barrel.
Pull the slide back as
far as it will go and
place onto the guide.
Push the slide forward
in the guide.
CLICK
CLICK
Push on the cover until
it engages.
Push in the magazine
completely.
The weapon is
assembled.
CAUTION! Risk of injury!
During firing without cover, the slide is not fixed. This can result in damage to the weapon.
¾ Use the weapon only with fitted and locked cover (must engage noticeably when fitted).