User's Manual

50
iP1 SmartSystem – PersonalizediP1 SmartSystem
18 Trouble shooting
This chapter describes other possible malfunctions that may occur and corresponding remedial
measures that the user can perform based on the cause of the malfunction. If the malfunction can-
not be remedied with the measures described here, please contact Armatix U.S.A., Inc.
18.1 Mechanical malfunctions
Malfunction Cause Remedial measure
Cartridge does not
fire.
Communication error between the
iW1 wristwatch and the iP1 pistol.
See Chapters 8-11.
Faulty ammunition. Unload the iP1 pistol, dispose of the
cartridge that failed to fire, and use
other / recommended ammunition.
iP1 pistol is very dirty. Clean the iP1 pistol.
The trigger is not completely pulled
back within 60 seconds.
Pull the trigger within 60 seconds as
far as it will go.
No or empty batteries in the iP1 pis-
tol.
Install fully charged batteries in the
iP1 pistol.
Electronics damaged. Contact Armatix U.S.A., Inc.
Cartridge is not
ejected.
Faulty ammunition. Unload the iP1 pistol and use other /
recommended ammunition.
Slide does not go back fully. Unload and clean the iP1 pistol, and
perform a function test. Use other /
recommended ammunition.
Ejection mechanism damaged. Contact Armatix U.S.A., Inc.