User's Manual

15
iP1 SmartSystem – PersonalizediP1 SmartSystem
1.1.3 Trigger with Trigger Switch
The trigger includes a mechanical locking switch with prevents it from being pulled to the rear.
When the trigger switch is in the left position (when viewed in the firing direction, with the muzzle
pointed away from the user), the trigger is locked. When it is in the right position, the trigger is
released and can be pulled.
Pistol safe.
Trigger switch pressed
to the left in firing
direction.
Pistol safe.
Trigger switch pressed
to the left in firing
direction.
Pistol armed. Trigger
switch pressed to
the right in firing
direction.
Pistol armed. Trigger
switch pressed to
the right in firing
direction.
Although iP1 pistols have several internal safeties features designed to prevent an uninten-
tional discharge if the pistol is dropped or hit, the proper and safe function of the iP1 pistol
depends on it being used for its intended purposes and not being altered or modified. Like
any other mechanical device, if the iP1 pistol is subject to unusual and extreme forces, failure
can occur. Therefore, safe firearm handling practices and the instructions and safety warn-
ings in this manual must always be followed to minimize the risk of a negligent discharge.
In case any of the iP1 pistol’s safety features prove to be ineffective for any reason, the
possibility of an unintentional discharge exists. If so, the iP1 pistol should be immediately
unloaded and not be used again until it has been examined by Armatix U.S.A., Inc.