User's Manual

29
iP1 SmartSystem – PersonalizediP1 SmartSystem
6 Activating the iP1 - Personalized pistol
To activate the iP1 pistol using the iW1 wristwatch, complete the following steps:
1. Beginning with the standard display, press the bottom right button to bring up the pistol
menu.
2. Press the top right button for 3 seconds to bring up the pistol submenu. Note: The pistol sub-
menu can also be accessed directly from the standard display by pressing the bottom right
button for three seconds.
3. Enter the 5 digit PIN code by pressing the top left button for 1, the top right button for 2,
the bottom left button for 3, and the bottom right button for 4. If you made an misstake in
entering a digit, it can be corrected by pressing the middle right button. When the fifth digit is
entered, the PIN code is automatically accepted. If the correct PIN code is entered, the display
will read “GOOD” for 2 seconds.
If an incorrect PIN code is entered, the display will read “FAIL.”. Press the top right button to
return to the standard display and repeat steps 1 through 3. If an incorrect PIN code is en-
tered three times in a row, the iW1 wristwatch rejects further PIN code entries. The PIN code
function of the iW1 wristwatch must be reset using the SuperPIN pursuant to the instructions
in Chapter 9.
4. Enter the time (between a minimum of 1 hour and a maximum of 8 hours) within which the
pistol will remain activated by pressing the top left button to increase the activation time and
the bottom left button to decrease the activation time. Press the top right button to confirm
the setting. Once the activation time is set, the iW1 wristwatch will automatically return to
the standard display.