User's Manual

30
iP1 SmartSystem – PersonalizediP1 SmartSystem
When the activation time expires you will be alerted by a sound from the iW1 wristwatch and
the iP1 pistol will no longer be activated. To reactivate the iP1 pistol, you must complete steps
1 through 4 again.
5. To confirm that the iP1 pistol and iW1 wristwatch have been properly synced and are commu-
nicating with each other, hold the unloaded iP1 pistol (with an empty magazine and charged
batteries inserted) in your shooting hand and the iW1 wristwatch within 10” of it and actuate
the backstrap by squeezing it towards the front of the iP1 pistol:
• If the LED lights up green, the iP1 pistol has been successfully synced with the iW1
wristwatch and is actively communicating with it. The iP1 pistol is now capable of firing
when loaded.
• If the LED lights up blue, there is no magazine in the iP1 pistol, or it is not correctly
inserted;
• If the LED lights up red, the iP1pistol has not been successfully synced with the iW1 wrist-
watch or is not communicating with it. The iP1 pistol is not capable of being fired. Make
sure the iP1 pistol is within 10” of the iW1 wristwatch and repeat steps one through five.
• If the LED flashes red and the iW1 wristwatch displays “no sync,” follow the instructions
on synchronizing the time between the iP1 pistol and iW1 wristwatch in Chapter 8.
• If the LED flashes red and the iW1 wristwatch displays “noRef,” follow the instructions in
Chapter 11 to reference the iP1 pistol to the iW1 wristwatch.
1x
3 sec.
2
43
1
Call up pistol menu:
Press BR 1x.
Call up submenu:
Hold TR pressed for 3
seconds.
Enter PIN code.
Correction: MR.