User's Manual

42
iP1 SmartSystem – PersonalizediP1 SmartSystem
14 Loading
Use of improper ammunition could cause death or serious personal injury, and/or property
damage. Only use high quality commercially manufactured .22 LR ammunition that meets
SAAMI or CIP standards.
Identify the particular type of ammunition that Armatix recommends for use in the iP1 pistol.
To load the magazine, press each cartridge into the magazine from the front, with the cartridge
bottom first, against the force of the magazine spring. A maximum of ten .22LR cartridges can be
loaded into the magazine.
Insert the magazine into the magazine well until the magazine catch locks into place.
1.
2.
CLICK
Release and remove
the magazine.
Grip the magazine,
pull the slide at the
same time when filling.
Insert the ammunition
as shown, max. 10x
caliber .22lr.
Push in the magazine
completely.
If the slide is in the forward position, hold the iP1 pistol with your firing hand and, while keep-
ing your finger off the trigger and outside of the trigger guard, grasp the rear of the slide at the
indented area with your other hand and pull the slide fully back and then release it, allowing it to
return to the fully forward position. (Note: If you have difficulties locking the magazine, pull back
the slide and hold it in the rearward position while inserting the magazine).
or