User's Manual

47
iP1 SmartSystem – PersonalizediP1 SmartSystem
16 Reloading when firing
When reloaded in the following manner, the iP1 pistol will be cocked and ready to fire by
pulling the trigger. If you do not intend to immediately continue firing the iP1 pistol, do not
reload it in this manner.
When the last cartridge is fired, the slide will be locked in the rearward position by the slide stop
lever. In order to insert a new magazine and resume firing, complete the following steps:
1. Secure the trigger by pressing the trigger switch to the left.
2. Remove the empty magazine by pressing down on the magazine catch.
3. Insert a loaded magazine into the magazine well until the magazine catch locks it in place.
4. Release the slide to return it to the forward (closed) position by either pressing the slide stop
lever down or grasping the rear of the slide at the indented area with your other hand and
pulling the slide fully back and then releasing it.
5. Release the trigger by pressing the trigger switch to the right.
The authorized user (with the corresponding iW1 wristwatch) can now continue firing the iP1
pistol simply by pulling the trigger.
1.
2.
4.
3.
1.
3.
3.
2.
1.
DANGER!
Secure trigger by
pressing the trigger
switch to the left.
Remove the magazine,
reload and install.
Press the slide release
lever, the slide moves
forwards.
Pistol is loaded
and cocked!