User's Manual

52
iP1 SmartSystem – PersonalizediP1 SmartSystem
Malfunction Cause Remedial measure
Bullet strikes to the
side of the target.
Faulty ammunition. Use other / recommended ammuni-
tion.
Front sight not properly adjusted. Adjust front sight.
Bullet strikes above
or below the target.
Faulty ammunition. Use other / recommended ammuni-
tion.
Front sight damaged. Replace front sight.
18.2 Electronic malfunctions
Malfunction Cause Remedial measure
LED display does not
light up (backstrap
actuated).
No or empty batteries in the iP1
pistol.
Install fully charged batteries in the
iP1 pistol.
Backstrap switch damaged. Contact Armatix U.S.A., Inc.
iP1 pistol is in “iP1 SmartSystem –
Basic-Mode”.
Contact Armatix U.S.A., Inc.
LED display lights
up red.
Pistol function of the iW1 wristwatch
not activated.
Enter the 5 digit PIN code in the iW1
wristwatch.
iW1 wristwatch is not communicat-
ing with the iP1 pistol.
Bring iW1 wristwatch within 10" of
the iP1 pistol.
LED display flashes
red and “no sync”
message displayed
on the iW1 wrist-
watch
System times of iW1 wristwatch and
iP1 pistol are not synchronized.
Synchronize system times of iW1
wristwatch and iP1 pistol.
Wrong iW1 wristwatch. Make sure you are using the wrist-
watch that is referenced to the iP1
pistol you are trying to synchronize.