User's Manual

55
iP1 SmartSystem – PersonalizediP1 SmartSystem
5. Once the slide is locked to the rear, both visually and physically (with your finger) inspect both
the chamber and the magazine well of the iP1 pistol to be sure that no ammunition remains
in either place.
6. Release the slide to return it to the forward (closed) position by either pressing the slide stop
lever down or grasping the rear of the slide at the indented area with your other hand and
pulling the slide fully back and then releasing it.
7. Release the trigger by pressing the trigger switch to the right.
8. With the muzzle of the iP1 pistol pointed in a safe direction (a safe direction is one in which
no one can possibly be injured in the event of an unintentional discharge), hold the hammer in
the rearward position with your thumb, pull the trigger to allow the hammer to move forward,
then allow the hammer to slowly move forward using your thumb and release the trigger.
9. Secure the trigger by pressing the trigger switch to the left.
1.
2.
1.
2.
Secure trigger by
pressing the trigger
switch to the left.
Release and remove
the magazine.
Grip the slide, pull
back completely, ...
… eject the cartridge.
Inspect the chamber - it
must be empty!
Release the slide, un-
cock the pistol. Make
sure that the trigger
is secured. Insert an
empty magazine, if
required.