User's Manual

62
iP1 SmartSystem – PersonalizediP1 SmartSystem
6. Wipe the exposed areas of the slide that you have cleaned in step 5 with a clean patch and
examine it. If it is not clean, repeat steps five and six until the patch remains clean.
21.3 Frame
Check the frame for cleanliness. If necessary, clean the frame as follows:
1. Wipe exposed parts of the frame with a clean patch that has been slightly dampened with gun
cleaning solvent or a cleaner-lubricant-preservative.
2. Wipe the exposed areas of the frame with a clean patch and examine it. If it is not clean,
repeat steps one and two until the patch remains clean.
21.4 Magazine
Inspect the magazine for dirt or visible damage. If necessary, clean the magazine as follows:
1. Wipe the outside of the magazine and the feed lips with a clean patch that has been slightly
dampened with gun cleaning solvent or a cleaner-lubricant-preservative.
2. Wipe the outside of the magazine and the feed lips with a clean patch and examine it. If it is
not clean, repeat steps one and two until the patch remains clean.
After you have cleaned the iP1 pistol, lubricate it as follows:
1. Slightly dampen a clean patch with gun oil or a cleaner-lubricant-preservative and wipe the
outside of the barrel, the inside of the slide, and the outside of the magazine.
2. Spread one drop of gun oil or a cleaner-lubricant-preservative along the running surfaces of
the slide where it matches with the guide rails of the frame.