User's Manual

63
iP1 SmartSystem – PersonalizediP1 SmartSystem
Your iP1 pistol is designed to operate properly with only a small amount of lubrication. Do not
over-lubricate the iP1 pistol because too much lubricant can collect unburned powder and
other debris and prevent the iP1 pistol from functioning properly.
After you have finished cleaning and lubricating the iP1 pistol, and before you assemble it, you
should inspect the barrel for lead build up, bulges, cracks or obstructions and inspect the frame and
slide for any corrosion or visible damage.
Do not use a cracked, bulged, or obstructed barrel. Contact Armatix U.S.A., Inc. for instruc-
tions on having it replaced.
Check the magazine to make sure the follower and lips are not damaged. Press down on the fol-
lower with your fingertip and release it to make sure it springs back up and does not catch in the
magazine tube.