User's Manual

71
iP1 SmartSystem – PersonalizediP1 SmartSystem
27 Upgrading the iP1 SmartSystem - Basic to the iP1 SmartSystem -
Personalized
Make sure that the iP1 pistol is unloaded (both chamber and magazine empty) and the ham-
mer is in the forward (uncocked) position before performing the upgrade procedure.
An iP1 SmartSystem – Basic can be upgraded to the iP1 SmartSystem – Personalized and synced
with an iW1 wristwatch. (Note: After you have synced the iP1 pistol to an iW1 wristwatch, it can not
be restored to the original iP1 SmartSystem – Basic configuration.)
To upgrade the iP1 SmartSystem – Basic to the iP1 SmartSystem – Personalized, proceed as follows:
1. First, delete the information stored in the iP1 pistol by resetting it as described in Chapter 10.
Resetting the iP1 also configures it to operate in Personalized mode.
2. Second, enter the 5-digit PIN code to your iW1 wristwatch as described in Chapter 6.
3. Third, reference the iP1 pistol to the iW1 wristwatch, as described in Chapter 11.
Now you are able to use the additional safety features of the SmartSystem - Personalized.