Product Assembly Instructions Item # LCMUBDGRQNB NOT PROVIDED 1/5
A: Headboard x 1 B: Footboard x 1 C: Side Panel x 2 D: Middle bar x 1 E: Slats x 16 F: Leg x 2 G: Support Leg x 2 H: Bolt / M6*20 x 18 L: Bolt M6*35 x2 P: Threaded Rod M8*70 x 2 I: Flat Washer / Ø19 x 24 M: Nuts M8 x4 Q: Screw M4*30 x8 R: Wrench x1 J: Lock Washer / Ø12 x 24 N: Washer Semicircle x 4 K: Allen wrench O: Bolt M8*90 x1 x2 2/5
K H J I B K H J I F P Step 1 : Turn the Footboard (B) over and place it on the ground where the exterior finish will not be scratched. Align the screw holes on the Footboard(B) with the screw holes of Legs (F). Insert flat washers (I) lock washer (J) and bolt (H) into each hole. Once the screws are in place,tighten the screw until firmly attached with the allen-wrench (K) provided. Step 2: Insert Threaded Rod(P) into the middle hole of footboard(B), tighten the screw until firmly attached.
HEAD K O A I R M J J I N FOOT R N I J M P C K R MJ IN IJ O AD C HE B D UN ER R I J OT FO M N Step 5 : Under position connect Footboard(B) with Side Panel(C). Insert Semicircle Washer(N), Flat Washer(I), Lock Washer(J), Nut(M) with Threaded Rod(P). Tighten the screw until firmly attached with the wrench(R) provided. Step 6 : Under position connect Headboard(A) with Side Panel(C).
Q E Step 8 : Put on slats into the frame. Insert the screws (Q) into each hole. Once the screws are in place,tighten the screw until firmly attached with the screwdriver.