SETODAFBL30

Product Assembly Instructions
Insert Factory Item # LCAFBTBL30
1 2 3
4 5
X12
X1 X2
X1
M6 spacer
Wrench
Table Top Table Leg
6
X12
M6×20
X1
Kickstand
1
1
2
3
2
6
4
5
5
4
6
Step 1 : Turn the table over and place it on the ground
where the exterior finish will not be scratched.
Step 2 : Align the screw holes of the table legs with the screw holes of the table top,
insert flat washers(5) and screws(4) into each hole,
once the screws are in place, tighten the screw until firmly attached with the wrench provided.
Step 3: Insert the flat washer (5) and screw (4) into each hole, and then install the Kickstand.