User's Manual

ManualsBrandsArmor3 ManualsControllersNuChamp Wireless Game Controller For Nintendo SwitchR - Armor3

User Manual for Bluetooth Pro Controller for Nintendo Switch

1. Product description：

This is a Bluetooth game controller for Nintendo Switch. It connects to the console via Bluetooth

communication, but also works via wired connection.

2. Product features：

(1)Contains all the buttons and cooresponding functions of original Pro controller. Adds Turbo speed

control function and motor vibration strength control function.

(2)Provide 4 green LED status indicators.

(3)20 function buttons input. Docking button is convenient for first pairing and power-off.

(4)Built-in dual vibrators and high precision analogue sticks.

(5)4 mapping buttons M1,M2,M3,M4 on the back, with 4 groups of state for option.

（6)Built-in 6 axis gyroscope for fast and accurate target locking.

Menu button +

Action button X

Action button A

Right analogue stick/L3

Action button Y

TURBO button

Action button B

Type-C port

Left analogue stick/L3

D-pad

HOME button

LED status indicators

Menu button -

Capture button

Summary of content (6 pages)

PAGE 1
User Manual for Bluetooth Pro Controller for Nintendo Switch 1. Product description： This is a Bluetooth game controller for Nintendo Switch. It connects to the console via Bluetooth communication, but also works via wired connection. 2. Product features： (1)Contains all the buttons and cooresponding functions of original Pro controller. Adds Turbo speed control function and motor vibration strength control function. (2)Provide 4 green LED status indicators. (3)20 function buttons input.
PAGE 2
Docking button M3 M1 M4 M2 3. Functions description: (1) Connection way to the game console：①Wired connection: By USB cable. ②Wireless connection: By Bluetooth communication. st (2) Wireless Bluetooth connection：For 1 pairing, press and hold Docking button for 3 seconds until 4 LEDs flash.Enter the pairing screen of the console, start pairing, the controller works after pairing succeeds and corresponding LED keeps illuminating.
PAGE 3
(11) There are 4 mapping buttons M1/M2/M3/M4 with 4 groups of state for option on the back of the controller. Three groups with mapping functions: Firstly, M1-A, M2-B, M3-X, M4-Y. Secondly, M1-R, M2-L, M3-ZR, M4-Z. Thirdly, M1&M3-R3，M2&M4-L3. The fourth group without functions, M1/M2/M3/M4 without functions output. In the state of connection with console or PC, press and hold Turbo button, then press menu button -, it switches to another state.
PAGE 4
2). Click controllers icon on the main menu, as below picture: 3). Select “change grip/order”，as below picture： 4). Click “change grip/order”to enter the pairing interface. Press and hold Docking button for 3 seconds to establish pairing, 4 LED indicators flash, release your hand, wait for 5-30 seconds until pairing succeeds and controller icon shows up on the screen, corresponding channel LED indicator keeps on. 12.
PAGE 5
Docking button to establish a successful pairing with the console, the controller automatically exits factory mode, now the function to awake up the controller by any button is activated. 15. Gyroscope sensor calibration: After the controller successfully connects with the console, return to the main menu, click System Settings to enter the Setting menu.
PAGE 6
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.