Product Manual

Cord:
12" Power cord
Base Pad:
10" Water-resistant
On/Off Switch:
Slide toggle on/off switch
Vent Openings:
Do not block or expose to water
Terrycloth Applicator Bonnet:
For applying wax or polish. Washable and re-usable.
Soft Bufng Bonnet:
For removing wax or polish and bufng. Reusable.
9
GETTING TO KNOW YOUR
ORBITAL POLISHER
Before using your new Armor All™ orbital polisher, read and familiarize yourself with the safety rules listed in this
manual and with the features below.
Wheel-Style Handle:
For optimum stability
Variable Speed Dial:
Dial up or down for added
control when needed
WARNING:
Do not allow familiarity with your orbital polisher to make you careless. Remember that a
careless fraction of a second is sufcient to inict severe injury.
WARNING:
Your orbital polisher is designed for and
should only be connected to an AC power supply
that is 120 volts, 60 Hz (normal household current)
. Do not operate this tool on direct current (DC). A
substantial voltage drop will cause a loss of power and the motor will overheat. If your orbital polisher does
not operate when plugged into an outlet, double check the power supply.
TERRYCLOTH APPLICATOR
BONNET
WOLLEN BUFFING BONNET
VENT OPENINGS
ON/OFF SWITCH
WATER-RESISTANT FOAM
BUFFING WHEEL
VARIABLE SPEED
DIAL
POWER CORD
(NOT PICTURED)
MOTOR HOUSING
WHEEL-STYLE
HANDLE