SDS

ManualsBrandsARMORPOXY ManualsGarage Floor Paint3 Gal. Medium Gray Gloss 2 Part Epoxy Interior/Exterior Concrete Basement and Garage Floor Coating Floor Paint

PRODUCT IDENTIFIER – ARM707X-CM A

DATE & VERSION – MARCH 05, 2021 VERSION 03

SAFETY DATA SHEET (SDS)

Section 1. Identification

Product identifier

ARM707X-CM A

Other means of identification

ARM707X-CM A

Recommended use and restrictions on use

Floor Coating

Initial supplier identifier

Armorpoxy Inc. 1260 North Avenue, Plainfield, NJ 07062 info@armorpoxy.com T:

888-755-7361

Emergency telephone number/restriction on use

Chemtrec 24 hour number 800-424-9300

Section 2. Hazard identification

Classification of hazardous product (name of the category or subcategory of the hazard class)

Skin irritation (Category 2)

Sensitization – Skin (Category 1)

Eye irritation (Category 2A)

Hazardous to the aquatic environment – Acute & Chronic (Category 2)

Information elements (symbols, signal words, hazard statements and precautionary statements of the category/subcategory)

Warning

H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

H319 Causes serious eye irritation.

H401 Toxic to aquatic life.

H411 Toxic to aquatic life with long lasting effects.

P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P264 Wash hands/nails/face thoroughly after handling. P272 Contaminated work clothing

should not be allowed out of the workplace. P280 Wear gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN, Wash

with plenty of water for several minutes. P333 + P313 IF SKIN irritation or rash occurs: Get medical attention. P362+P364 Take off contaminated

clothing and wash it before reuse. P305 + P351 + P338 IF IN EYES, Rinse cautiously with water for several minutes. Remove contact lenses, if

present and easy to do. Continue rinsing. P337 + P313 If eye irritation persists: Get medical attention. P273 Avoid release to the environment. P391

Collect spillage. P501 Dispose of contents/container into safe container in accordance with local, regional or national regulations.

Other hazards known

None

Section 3. Composition/information on ingredients

Chemical name (common name/synonyms)

CAS number or other

Concentration (%)

Reaction product: bisphenol-A-(epichlorhydrin) epoxy resin

25085-99-8

60-100

Alkyl glycidyl ether

68609-97-2

< 10

Benzyl alcohol

100-51-6

< 10

* Statement - This safety data sheet provides concentration range(s) instead of the actual concentration(s) considered trade secret(s).

Section 4. First-aid measures

Inhalation

IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a doctor if you feel unwell.

Ingestion

IF SWALLOWED: Immediately call a doctor. DO NOT INDUCE VOMITING. NEVER give anything by mouth if victim is

rapidly losing consciousness, or is unconscious or convulsing. Rinse mouth thoroughly with water. Have victim drink two glasses

of water. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration.

Skin contact

IF ON SKIN: wash with plenty of water. (15-20 minutes) IF SKIN irritation or rash occurs: Get medical attention. Take off

contaminated clothing and wash it before reuse.

Eye contact

IF IN EYES, Rinse cautiously with water for several minutes (15-20). Remove contact lenses, if present and easy to do. Continue

rinsing. If eye irritation persists: Get medical attention.

Most important symptoms and effects (acute or delayed)

Causes skin irritation.

Indication of immediate medical attention/special treatment

In all cases, call a doctor. Do not forget this document.

Section 5. Fire-fighting measures

Specific hazards of the hazardous product (hazardous combustion products)

Carbon oxides and other irritant/toxic gases and fumes.

Suitable and unsuitable extinguishing media

In case of fire: Use carbon dioxide, chemical powder agent and appropriate foam to extinguish surrounding products.

Special protective equipment and precautions for fire-fighters

During a fire, irritating/toxic smoke and fumes may be generated. Do not enter fire area without proper protection. Firefighters should wear proper

protective equipment and self-contained breathing apparatus with full facepiece. Shield personnel to protect from venting, rupturing or bursting cans.

Move containers from fire area if it can be done without risk. Water spray may be useful in cooling equipment and cans exposed to heat and flame.

Summary of content (9 pages)

PAGE 1
PRODUCT IDENTIFIER – ARM707X-CM A DATE & VERSION – MARCH 05, 2021 VERSION 03 SAFETY DATA SHEET (SDS) Section 1. Identification Product identifier ARM707X-CM A Other means of identification ARM707X-CM A Recommended use and restrictions on use Floor Coating Initial supplier identifier Armorpoxy Inc. 1260 North Avenue, Plainfield, NJ 07062 info@armorpoxy.com T: 888-755-7361 Emergency telephone number/restriction on use Chemtrec 24 hour number 800-424-9300 Section 2.
PAGE 2
PRODUCT IDENTIFIER – ARM707X-CM A DATE & VERSION – MARCH 05, 2021 VERSION 03 Section 6. Accidental release measures Personal precautions, protective equipment and emergency procedures Restrict access to area until completion of clean-up. Ensure clean-up is conducted by trained personnel only. All persons dealing with clean-up should wear the appropriate protective equipment (See Section 8). Methods and materials for containment and cleaning up Ventilate area of release.
PAGE 3
PRODUCT IDENTIFIER – ARM707X-CM A DATE & VERSION – MARCH 05, 2021 VERSION 03 Section 11. Toxicological information Information on the likely routes of exposure (inhalation, ingestion, skin and eye contact) Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation.
PAGE 4
PRODUCT IDENTIFIER – ARM707X-CM A DATE & VERSION – MARCH 05, 2021 VERSION 03 Section 16. Other information Date of the latest revision of the safety data sheet March 05, 2021 version 3 (NSS ENTREPRISE INC.) Corrections Complete review References Safety Data Sheets from manufacturer/supplier & from Canadian Centre for Occupational Health and Safety, CCOHS.
PAGE 5
PRODUCT IDENTIFIER – ARM707X-CM A DATE & VERSION – MARCH 05, 2021 VERSION 03 5
PAGE 6
PRODUCT IDENTIFIER – ARM707X-CM B DATE & VERSION – MARCH 05, 2021 VERSION 03 SAFETY DATA SHEET (SDS) Section 1. Identification Product identifier ARM707X-CM B Other means of identification ARM707X-CM B Recommended use and restrictions on use Floor Coating Initial supplier identifier Armorpoxy Inc.; 1260 North Avenue, Plainfield, NJ 07062 info@armorpoxy.com T:888-755-7361 Emergency telephone number/restriction on use Chemtrec 24 hour number 800-424-9300 Section 2.
PAGE 7
PRODUCT IDENTIFIER – ARM707X-CM B DATE & VERSION – MARCH 05, 2021 VERSION 03 Section 4. First-aid measures Inhalation Ingestion IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a doctor if you feel unwell. IF SWALLOWED: Immediately call a doctor. DO NOT INDUCE VOMITING. NEVER give anything by mouth if victim is rapidly losing consciousness, or is unconscious or convulsing. Rinse mouth thoroughly with water. Have victim drink two glasses of water.
PAGE 8
PRODUCT IDENTIFIER – ARM707X-CM B DATE & VERSION – MARCH 05, 2021 VERSION 03 Section 9.
PAGE 9
PRODUCT IDENTIFIER – ARM707X-CM B DATE & VERSION – MARCH 05, 2021 VERSION 03 Section 15. Regulatory information Safety/health Canadian regulations specifics Refer to Section 2 for the appropriate classification. This product has been classified in accordance with the hazard criteria of the Hazardous Products Regulations (HPR).