Manual

ManualsBrandsArmscor ManualsFirearms1400

ARMSCOR

MODEL 1400

USER’S MANUAL

MANUAL

WARNING:

READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL

CAREFULLY BEFORE USING THIS FIREARM.

DISCHARGING FIREARMS IN POORLY VENTILATED AREAS, CLEANING

FIREARMS OR HANDLING AMMUNITION MAY RESULT IN EXPOSURE TO

LEAD AND OTHER SUBSTANCES KNOWN TO THE STATE OF CALIFORNIA TO

CAUSE BIRTH DEFECTS, REPRODUCTIVE HARM AND OTHER SERIOUS

PHYSICAL INJURY. HAVE ADEQUATE VENTILATION AT ALL TIMES. WASH

YOUR HANDS THOROUGHLY AFTER EXPOSURE.

The model M1400 is among the newest in Armscor line of cal.22 rim fire rifles. It is

basically a modified version of the M14P with an enhanced design of receiver, bolt

ejector that gives a smoother and more reliable action. The rear of the cocking cam is

provided with an indicator that shows the firing pin at “cocked” position. Other notable

features include a lightweight and specially contoured barrel and a classic gunstock.

INSTRUCTIONS FOR OPERATING AND CARE

This rifle is packed and shipped from the factory with detached bolt assembly.

* TO INSERT BOLT INTO RECEIVER

Cock the bolt assembly by gripping the bolt firmly and rotating the cocking cam counter

clockwise. Move safety to “F” position. Depress trigger. Align the lug underneath the

bolt assembly with the receiver track. Slide the cocked bolt assembly into the receiver.

Push fully forward and turn cocking cam clockwise until lugs are properly seated.

Release the trigger.

Page 1 of 7

Summary of content (7 pages)

PAGE 1
ARMSCOR MODEL 1400 USER’S MANUAL MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM. DISCHARGING FIREARMS IN POORLY VENTILATED AREAS, CLEANING FIREARMS OR HANDLING AMMUNITION MAY RESULT IN EXPOSURE TO LEAD AND OTHER SUBSTANCES KNOWN TO THE STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS, REPRODUCTIVE HARM AND OTHER SERIOUS PHYSICAL INJURY. HAVE ADEQUATE VENTILATION AT ALL TIMES. WASH YOUR HANDS THOROUGHLY AFTER EXPOSURE.
PAGE 2
* TO LOAD MAGAZINE BOX Hold magazine firmly in one hand. With the other hand, position cartridge over magazine lip just forward of notch. Insert cartridge head under ears at rear of magazine. Repeat until the magazine is fully loaded to its capacity. . * TO MAKE SAFE Pull safety on right side of the receiver in the direction of the “S” mark. This locks trigger and gun cannot be fired. * TO ATTACH MAGAZINE BOX Position magazine open end and ears rearward.
PAGE 3
* FOR SHORT STORAGE After firing, swab bore with clean cloth patch wet with approved cleaning solvent. Wipe dry. Apply light coat of oil on barrel bore, cocking cam, bolt and other metal surfaces to keep free of rust. * FOR LONG STORAGE After firing, swab bore with clean cloth patch wet with approved cleaning solvent. Wipe dry. Apply a good grade of gun grease or gun oil on the bore and the outside metal surfaces. Before firing after storage, remove all traces of gun grease or gun oil from barrel bore.
PAGE 4
Weight (empty) 6.0 lbs (Approx) Finish Blued Barrel Ordnance Steel, Precision Rifled with Six (6) Grooves Right Hand Twist. Stock Natural finish Philippine Wood stock, Monte Carlo Style with Plastic Butt Pad Without Check Piece, Checkering and Grip Cap.
PAGE 5
Cocking Indicator 140E17 Cocking Indicator Spring 140E17A Cocking Cam Stud 1418 Cocking Cam Stud Retainer 1419 Extractor Left Hand 1421 Extractor Right Hand 1422 Extractor Plunger 1423 Extractor Spring 1424 Firing Pin 1425 Firing Pin Spring 1426 Firing Pin Spring Retainer Pin 1427 Firing Pin Spring Follower 1428 Firing Pin Cross Pin 1429A Hammer 1429 C- TRIGGER HOUSING ASSEMBLY Magazine Catch 1430 Magazine Catch Insert 1430A Magazine Catch Pivot Pin 1431 Magazine Catch Stop
PAGE 6
Trigger Spring 1442 Trigger Stop Pin 1443 Trigger Housing 1444 Trigger Housing Hold Down Screw (front) 1445 Trigger Housing Hold Down Screw (rear) 1446 D- MAGAZINE BOX ASSEMBLY Magazine Box 1447 Magazine Spring 1448 Magazine Spring Follower 1449 Magazine Spring Retainer 1450 Magazine Spring Retainer Cross Pin 1451 E- GUNSTOCK ASSEMBLY Butt Pad (plastic) 1452 Butt Pad Retainer Screws 1453 Gun Stock 1454 Page 6 of 7
PAGE 7
Page 7 of 7