REVOLVER USER’S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THE FIREARM.
ROCK ISLAND ARMORY USER’S MANUAL REVOLVER SAFETY, INSTRUCTION AND PARTS MANUAL As a responsible owner of this firearm, you must read the instructions and warnings in this manual carefully. Before using this firearm, make sure you understand thoroughly the contents of this manual. This manual must always be in the firearm’s carrying case whenever the owner/user brings it or when it transfers ownership.
TA B L E O F C O NT E NT S 1 1 2 Statement of Liability Ammunition Operating Instructions State-By-State Warnings Loading Safety Precautions Firing HEALTH & SAFETY 3 4 5 7 General Information & Mechanical Characteristics Tech Specs Unloading Basic Disassembly & Reassembly Care & Maintenance Storage and Transportation Ordering Parts Warranty Basic Parts M200 REVOLVER...........................................................5 M206A REVOLVER........................................................
01 | STATEMENT OF LIABILITY State-By-State Warnings CALIFORNIA STATE WARNING STATEMENT OF LIABILITY This revolver is classified as a firearm or dangerous weapon. It is expressly understood that we assume no liability for its resale or unsafe handling under local laws and regulations. Armscor assumes no responsibility for physical injury or properly damage resulting from either intentional or accidental discharge, or for the function of the firearm subjected to influence beyond their control.
02 | SAFETY PRECAUTIONS Safety must be the first and constant consideration of every person who handles firearms and ammunition. The person with a firearm in his possession has an important responsibility. He/she must know how to use his/her firearm safely: The M200/M206 REVOLVERS are one of the safest type handguns, as long as it is used correctly by a competent person. Following are basic safety precautions which the user must be thoroughly familiar with when handling the revolver. 1.
03 | ABOUT THE FIREARM GENERAL INFORMATION AND MECHANICAL CHARACTERISTICS The M200/M206 REVOLVERS are Rock Island Armory’s latest all-new version of a six-shot, swing out cylinder handgun specifically designed for police and military use. It comes as a result of an intensive design analysis for mechanical features, materials and modern manufacaturing processes. The gun features a simple but modern and reliable mechanical mechanism of high quality standards.
04 | TECH SPECS Model M200 M202 M206 Caliber 38 Special Action Double Magazine Capacity 6 Rounds Barrel Half-Shroud Bull Barrel Length 102mm. / 4in. Overall Height 223mm. / 8.75in. Weight Empty (Approx.) 0.80kg. / 1.76lbs. M206WG Full-Shroud 51mm. / 2in. 0.82kg. / 1.81lbs 174mm. / 6.88in. 171mm. / 6.75in. 0.72kg. / 1.59lbs 0.68kg. / 1.51lbs Trigger Pull 5.25 – 5.90 kg. (11.50 - 13lbs.
05 | BASIC PARTS M200 REVOLVER BASIC PARTS PART NAME PART NUMBER PART NAME PART NUMBER PART NAME PART NUMBER *Barrel (M200) 20001 Ejector Rod Spring 20017 Hammer Pawl Plunger 20035 *Barrel (M202) 20201 Ejector Rod Head 20018 **Trigger 20036 *Barrel (M206/M206WG) 20601 Ejector Rod Head(M206/M206WG) 20618 Trigger Pivot Pin 20037 Barrel Pin 20001A *Ejector Rod Guide 20019 Trigger Spring 20038 *Barrel Housing (M200) 20002 Ejector Alignment Pin 20020 Trigger Spring Rod 20039
06 | BASIC PARTS M206A REVOLVER BASIC PARTS PART NAME Barrel Barrel Pin PART NUMBER 20601 20001A PART NAME PART NUMBER PART NAME PART NUMBER Firing Pin 20021 Trigger Spring Spacer Spring 20040 Firing Pin Bushing 20022 Hand 20041 Barrel Housing (With integrated front sight) 20602 Firing Pin Bushing Retainer Pin 20023 Hand Pin 20042 Frame 20003 Firing Pin Spring 20024 Hand Rest Pin 20043 Cylinder 20004 Side Plate 20025 Transfer Bar 20044 Cylinder Lock 20005 Latch Spring Sto
07 | EXPLODED VIEWS M200 REVOLVER
08 | EXPLODED VIEWS M206A REVOLVER
09 | MAINTENANCE AMMUNITION LOADING THE CYLINDER SHOULD NOT BE SWUNG IN CAUTION: AND OUT OF THE FRAME WITH EXCESSIVE FORCE, AND NEVER BY WRIST ACTION. CAUTION: NEVER USE CARTRIDGES OF UNKNOWN CALIBER, ORIGIN AND LOAD. IT IS EXTREMELY DANGEROUS TO USE A CARTRIDGE WHOSE PRESSURE IS GREATER THAN INDUSTRY STANDARDS, AS THE FIREARM MAY BE DAMAGED, AND MAY RESULT IN DEATH OR SERIOUS INJURY TO THE SHOOTER OR OTHER PERSON. The M200 REVOLVER is chambered for Cal.
10 | BASIC DISASSEMBLY & REASSEMBLY DISASSEMBLY BEFORE STARTING DISASSEMBLY, CHECK CAUTION: TO ENSURE THAT THE CYLINDER CHAMBERS ARE FREE OF AMMUNITION. The cylinder-crane link assembly is removed by unscrewing the crane lock screw. Swing out the cylinder and draw forward out of the frame. With leather-padded pliers, unscrew the ejector rod head and remove the crane link out of cylinder. Further stripping of cylinder-ejector assembly is not recommended.
11 | MAINTENANCE CARE AND MAINTENANCE With proper care, your REVOLVER will provide you with years of dependable service. CLEANING For the revolver to function safely and reliably, it is essential to keep it always in good condition by making it free of rust, dirt, grease and firing residues. It is important to clean and lubricate the gun to avoid rusting of metal parts after firing and before storing. Doing the job requires no desassembly of mechanism parts.
12 | MAINTENANCE STORAGE AND TRANSPORTATION When storing the firearm and ammunition, store in separate locations, store ammo in a cool, dry location. When storing the gun for a prolonged period of time, It is necessary to oil it heavily with an acid-free lubricant. The external parts must be coated with an anti-rust oil or grease to prevent moisture causing the parts to rust and malfunction. Before usage, the revolver must be cleaned and wiped dry again as discussed previously.
13 | MAINTENANCE ORDERING PARTS Visit RIA website to browse, learn more about and purchase parts and ammunition for all of your Rock Island Armory products. www.advancedtactical.
14 | MAINTENANCE WARRANTY REGISTRATION Armscor’s warranty covers its firearms and parts. We offer limited lifetime warranty on our products for their intended purpose. As with any product, abuse, gunsmitting by an unqualified person and normal wear and tear are excluded. Additionally, if the firearm was modified and/or repaired by an unqualified gunsmith without permision from Armscor, then the warranty will be void. If warranty work should be required, return the firearm to the address listed below.
15 | MAINTENANCE NOTES
