VR60 SHOTGUN USER’S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THE FIREARM.
ROCK ISLAND ARMORY USER’S MANUAL VR60 SHOTGUN SAFETY, INSTRUCTION AND PARTS MANUAL As a responsible owner of this firearm, you must read the instructions and warnings in this manual carefully. Before using this firearm, make sure you understand thoroughly the contents of this manual. This manual must always be in the firearm’s carrying case whenever the owner/user brings it or when it transfers ownership.
TA B L E O F C O NT E NT S 1 1 2 Statement of Liability State-By-State Warnings Operating Instructions Safety Precautions HEALTH & SAFETY 3 4 5 Tech Specs Basic Parts Shotgun Disassembly Instructions..........................6 Choke Set................................................................7 Screw-in Choke Warning........................................
01 | STATEMENT OF LIABILITY State-By-State Warnings CALIFORNIA STATE WARNING STATEMENT OF LIABILITY This shotgun is classified as a firearm or dangerous weapon. It is expressly understood that we assume no liability for its resale or unsafe handling under local laws and regulations. Armscor assumes no responsibility for physical injury or properly damage resulting from either intentional or accidental discharge, or for the function of the firearm subjected to influence beyond their control.
02 | SAFETY PRECAUTIONS Safety must be the first and constant consideration of every person who handles firearms and ammunition. The person with a firearm in his possession has an important responsibility. He/she must know how to use his/her firearm safely: 1. Always keep the muzzle pointed at a safe direction. Watch the muzzle at all time: never point a gun, accidentally or intentionally, at any person or anything you do not intend to shoot. Identify the target before shooting; do not shoot at sounds. 2.
03 | TECH SPECS Model VR60 Caliber 12 Gauge Chamber 2.75in / 3in Action Semi-automatic Capacity 5 + 1 Rounds Choke Mobile, Full, Modified, and Improved Cylinder Barrel Contoured Barrel Length 500mm / 20in Overall Length 990mm / 39in Overall Width 40mm / 1.6in Overall Height 230mm / 9in Front Sight Bead Rear Sight Serration on receiver Weight, Empty 3.35kg / 7.38lbs Weight, Loaded 3.85kg / 8.
04 | BASIC PARTS VR60 SHOTGUN BASIC PARTS PART NAME PART NUMBER PART NAME PART NUMBER PART NAME PART NUMBER Upper Case 1 Flare Ramp Pin 26 Butt Connecting Screw M8 52 Lower Case And butt 2 Executive Pipe 27 Butt Fixing Washer 53 Trigger 3 Enforcement of Spring 28 Stock Belting 54 Blind Trigger 4 Arm Tube 29 Stock Rubber Screw 55 Blind Trigger Spring 5 Arm 30 Stock Rubber 56 Trigger Spring 6 Ball Spring 31 Shock 57 Trigger Cock Spring 7 Ball 32 Handle 58 Cock
05 | EXPLODED VIEWS VR60 SHOTGUN 49 60 65 66 62 64 61 59 57 1 52 2 47 27 14 53 21 13 12 20 19 22 16 23 11 8 9 45 15 17 18 10 28 31 26 4 55 48 54 38 35 37 3 51 32 72 39 40 30 29 43 44 33 6 50 71 34 25 24 5 67 68 46 63 56 69 58 41 36 73 74 76 42 7 70 77 75
06 | OPERATING INSTRUCTIONS SHOTGUN DISASSEMBLY INSTRUCTIONS MANUFACTURING WARNING: THIS MANUFACTURED FIREARM WAS DESIGNED TO PERFORM WITH ITS ORIGINAL PARTS. IT IS YOUR RESPONSIBILITY TO MAKE SURE THAT ANY PARTS YOU BUT ARE AUTHENIC AND CORRECTLY INSTALLED AND THAT THE PARTS HAVE NOT BEEN ALTERED OR CHANGED. IT IS IMPERATIVE THAT ONLY FACTORY PARTS BE USED AS REPLACEMENTS TO ASSURE THAT THE FIREARM REMAAINS FUNCTIONALLY SAFE AND OPERATES ACCURATELY.
07 | OPERATING INSTRUCTIONS 6. Remove the buttpad using a screwdriver to access the upper receiver retention bolt in the boid of the buttstock. 7. Insert Allen socket into upper receiver retention bolt and loosen the bolt 4 full turns. Remove the ratchet and lightly tap the extension and socket to push the retention bolt forward. After the upper receiver starts to separate, loosen the bolt 2 to 3 more turns. Gently tap the extension to further separate the upper receiver from the buttstock.
08 | MAINTENANCE MAINTENANCE AND CLEANING STEP 1. Disassemble your shotgun. IMPORTANT WARNING: BEFORE YOU START CLEANING YOUR SHOTGUN ALWAYS MAKE SURE IT IS UNLOADED AND POINTED IN A SAFE DIRECTION.
09 | MAINTENANCE STORAGE AND TRANSPORTATION When storing the firearm and ammunition, store in separate locations, store ammo in a cool, dry location. When storing the gun for a prolonged period of time, It is necessary to oil it heavily with an acid-free lubricant. The external parts must be coated with an anti-rust oil or grease to prevent moisture causing the parts to rust and malfunction. Before usage, the shotgun must be cleaned and wiped dry again as discussed preciously.
10 | MAINTENANCE ORDERING PARTS Visit RIA website to browse, learn more about and purchase parts and ammunition for all of your Rock Island Armory products. www.advancedtactical.
11 | MAINTENANCE WARRANTY REGISTRATION Armscor’s warranty covers its firearms and parts. We offer limited lifetime warranty on our products for their intended purpose. As with any product, abuse, gunsmitting by an unqualified person and normal wear and tear are excluded. Additionally, if the firearm was modified and/or repaired by an unqualified gunsmith without permision from Armscor, then the warranty will be void. If warranty work should be required, return the firearm to the address listed below.
12 | MAINTENANCE NOTES
