Warranty

Ten -Thirty (10/30) Year Limited Warranty For High Performance Ceiling Systems
WHAT OUR WARRANTIES MEAN
Our warranties are our promise to you that the Armstrong
®
ceiling and Armstrong installation materials you’ve purchased will be free from manufacturing
defects. Because our products are designed and engineered to be used together for the best performance possible, we warrant that Armstrong ceilings and
Armstrong installation materials, if used together, will be free from manufacturing defects as outlined below.
Please read all of the following terms carefully as this warranty may be affected by installation methods and materials used and site conditions.
Armstrong World Industries does not authorize any person to assume or extend any other warranty obligation or liability on its behalf.
What will Armstrong World Industries do?
If a manufacturing defect does occur within the terms and conditions of this warranty, you will be supplied with new material to replace the defective ceiling
product. The replacement materials will be of the same or similar design and quality.
What does this warranty not cover?
Damage that may occur due to Abnormal Conditions described above is not covered by this warranty.
This warranty does not cover damage caused by improper maintenance, improper installation, or by use contrary to our recommendations, such as use
outdoors or on surfaces other than ceilings.
This warranty does not cover normal wear and tear or shade changes due to exposure to smoke, fumes, leaks, or abuse.
This warranty does not cover labor charges to replace obvious visual defect in the material at time of installation.
We exclude and will not pay any consequential or incidental damage, loss or expense other than to the ceiling system itself.
This warranty is not transferable and applies to the original purchaser only. It does not apply to materials graded second or odd lot.
This warranty does not cover differences between samples or product photographs and actual product purchased.
Additional Note: Armstrong World Industries cannot guarantee that the published surface burning characteristics, fire resistance ratings, acoustical
performance, dimensional stability/sag or light reflectance will remain the same after repainting panels. All warranties will be voided by field painting.
How do you get service?
You must notify the retailer who sold you the material, in writing, of any product failure covered by this warranty within 30 days of first observation of failure.
If you are unable to contact your retailer, or if you notified your retailer of a defect and have not received satisfaction, please contact us at:
Armstrong World Industries, Inc
Attn: Customer Focus Center
P.O Box 3001
Lancaster, PA 17604
1-877-ARMSTRONG (276-7876)
ceilings.com
How does state law apply?
This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Some jurisdictions do not allow exclusion
or limitation of incidental or consequential damages or other limitations on implied warranties, so the limitation(s) or exclusion(s) in this warranty may not
apply to you.
THIS EXPRESS WARRANTY CONSTITUTES THE ENTIRE OBLIGATION OF ARMSTRONG WORLD INDUSTRIES AND THERE ARE NO OTHER WARRANTIES
EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY USE OR PURPOSE WHATSOEVER. THE ARMSTRONG
LIABILITY IS LIMITED TO THAT SET FORTH BELOW IN THIS WARRANTY. ARMSTRONG IS NOT LIABLE FOR ANY INSTALLATION OR REMOVAL COSTS
UNDER THIS WARRANTY, NOR IS RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OR COSTS UNDER THIS WARRANTY.
Please read all of the following terms carefully as this warranty may be affected by installation methods and materials used and site conditions. Armstrong
does not authorize any person to assume or extend any other warranty obligation or liability on its behalf.
High Performance Ceiling Products Covered by this Limited Warranty:
241 SuperTuff™, 269 Sand Pebble™, 271 Sahara™, 273 Sahara™, 276 Sahara™, 403 Esprit
®
Fiberglass, 404 Pebble Fiberglass,
410 Sonoflex™ Random Fissured Fiberglass, 416 Sonoflex™ Etched Fiberglass, 420 Random Fissured Fiberglass, 490 Yuma White™, 491 Yuma White™,
492 Yuma White™, 493 Yuma White™, 922 Fine Fissured™, 928 Fine Fissured™, 932 Fine Fissured™, 954 Classic Fine Textured, 972 Lumawash
®
,
973 Lumawash
®
, 1231 Brightex™ with Airguard™, 1728BL Fine Fissured™ Black, 9768 Sahara™ Scored II and 9769 Sahara™ Scored I.
The Armstrong products listed above are warranted to be free from defects in materials or factory workmanship for 30 years from the date of
installation when installed using an Armstrong suspension system and used under normal conditions. If these products are not installed using an
Armstrong suspension system the Armstrong products listed above are warranted to be free from defects in materials or factory workmanship for
10 years from the date of installation when installed under normal conditions. (Except for obvious defects in materials or factory workmanship, which
Armstrong World Industries must be notified of within 30 days of the date of installation.)
continued on next page

Summary of content (2 pages)