Submittal Sheet

SUBMITTAL
JOB:
ENGINEER:
CONTRACTOR:
REPRESENTATIVE:
ORDER NO:
SUBMITTED BY:
APPROVED BY:
DATE:
DATE:
DATE:
Page 1 of 2
STANDARD CIRCULATORS Series “H”
Page 1 of 2
FILE NO: 10.51
DATE: July 25, 2012
SUPERSEDES: 10.51
DATE: June 14, 2011
PUMP DESIGN DATA
Pump Model: Flange Size:
No. of Pumps:
Note:
Capacity: USgpm (I/s) Temperature: ºF (ºC)
Head: ft. (m) Liquid:
Companion Flanges Included
OPTIONAL EQUIPMENT
Performance curve See pg. 2
Maximum Working Pressure: 125 Psig 863 (kPa)
Maximum Operating Temperature: 225 ºF (107 ºC)
MATERIALS OF CONSTRUCTION
PUMP NAME
H-32 to H-54
(BRONZE Fitted)
H-63 to H-68
(BRONZE Fitted)
H-32 to H-54
(ALL BRONZE / LF-BRONZE*)
H-63 to H-68
(ALL BRONZE / LF-BRONZE*)
Pump Body Cast Iron Bronze / Lead Free Bronze
Impeller Non-Ferrous
Bearings Sleeve-Oil Lubricated
Shaft Alloy Steel-Copper Sleeve
Seal Mechanical
Stationary Seal Face
Coupler
H-32 & H-41 Flexible, 4-Spring
Flexible, Spacer Type
H-32 & H-41 Flexible, 4-Spring
Flexible, Spacer Type
H-51 to H-54 Flexible, Spacer Type H-51 to H-54 Flexible, Spacer Type
Sintered Silicon Carbide
DIMENSIONAL DATA
MODEL
FLANGE
SIZE
(N.P.T.)
MOTOR** DIMENSIONS Inches (mm)
SHIPPING
WEIGHT lbs
(kg)
H.P. PHASE & VOLT A B C D
H-32
1
1/6
1 Phase 115 V
15 (381) 8-1/2 (216) 12-1/2 (318) 7/8 (22) 33 (15.0) 1-1/4
1-1/2
H-41 1 1/6 15-1/4 (387) 8-1/2 (216) 12-1/2 (318) 3/4 (19) 33 (15.0)
H-51 1 1/4 17-1/4 (438) 11-1/2 (292) 13-1/2 (343) 3/4 (19) 53 (24.0)
H-52 1-1/4 1/3 17-1/4 (438) 11-1/2 (292) 13-1/2 (343) 7/8 (22) 54 (24.0)
H-53 1-1/2 1/2
1 Phase 115/230 V
or 3 Phase 208/230/460
or 575 V
20 (508) 11-1/2 (292) 16-1/2 (419) 7/8 (22) 64 (29.0)
H-54 2 3/4 20 (508) 11-1/2 (292) 16-1/2 (419) 7/8 (22) 71 (32.0)
H-63 1-1/2 1/2 23 (584) 13-1/2 (343) 19-3/4 (502) 7/8 (22) 96 (44.0)
H-64 1-1/2 3/4 23 (584) 13-1/2 (343) 19-3/4 (502) 7/8 (22) 100 (45.0)
H-65 1-1/2 1 23 (584) 13-1/2 (343) 19-3/4 (502) 7/8 (22) 102 (46.0)
H-66 2 3/4 23-1/4 (591) 14 (356) 19-3/4 (502) 7/8 (22) 120 (54.0)
H-67 2 1 23-1/4 (591) 14 (356) 19-3/4 (502) 7/8 (22) 125 (57.0)
H-68 2 1-1/2 3 Phase 208/230/460or 575 V 21-3/4 (552) 14 (356) 18-1/4 (464) 7/8 (22) 130 (59.0)
1 Phase 115 V or
3 Phase 208/230/460V
Dimensions shown are for reference only.
**All single phase motors are equipped with built-in thermal overload protection.
Three phase motors require external overload protection.
Conduit box not supplied on ½ hp or greater.
* Contains less than 0.25% lead, weighted average