Installation Guide

15
Three Seaming Methods for Floors Installed Using S-761
Seaming Modified loose lay with tape at the seam
(can also use 2-3” band of S-289 or S-288 at the seam)
After seam is cut fold back and
apply tape
Lay in first piece and hand roll with
roller
Apply the S-761 seam adhesive 1/8”
bead along the edge
Lay in second piece and hand roll adhesive will
ooze up between the pieces
Clean up adhesive with a damp
cloth with water
Finished Seam if any residue remains
and has dried it can be removed with
Once N’ Done cleaner.