Installation Guide

2
Three Seaming Methods for Floors Installed Using S-761
Fiberglass/Stratamax
1.
Modified Loose Lay with
vinyl floor tape/or 2-3” band
of adhesive at the seam
2. S-289 Releasable Adhesive
3.
S-288 Full Spread
1. Double cut the seam before
applying the vinyl tape. May
apply S-289 at the seam
and let go dry to touch prior
to cutting seam. S-288 cut
seams dry then apply
adhesive.
2. Seams may be cut after
adhesive is dry to touch.
3. Cut the seam before
applying adhesive to the
seam area. Leave 1-2 feet
back from the edge of the
seam area after full
spreading floor.
Installation Seaming Methods