Instructions

Specifications
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
USER MANUAL
Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs. The components made in the USA and Japan. .10 years no-hassle warranty
§ Superb light of amazing constant brightness due to powerful electronics and active temperature control without timers.
§ Rechargeable flashlight with magnet USB charger.
§ Efficient TIR-optics and no “tunnel vision” effect even after continuous use.
§ Warning Indication of low battery level and high temperature.
§ Side switch for comfortable one-hand operation and easy modes switching.
§ Multicolor State Indication and ultra low current drain in OFF-state – more than 25 years.
§ Magnet, removable clip, comfortable holster and possibility of tail-stand for multipurpose use.
§ Solid body without long wires, weak rubber connectors and unnecessary boxes.
§ Total protection from water, dirt and dust penetration – flashlight continues to work even at the depth of 10 meters.
Warnings
Remember that old or low-quality batteries can be damaged under heavy load and explode.
Specifications are subject to change without notice.
* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.
Armytek Optoelectronics Inc.
Web: www.armytek.com Email: [e-mail]
Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada
Care and Storage
1. Always follow the instructions from this manual and recommendations on battery usage.
2. Apply only the recommended power sources.
3. Do not reverse battery polarity.
4. Do not use different power sources together, i.e. old ones with new ones, charged with
discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.
5. Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6. Do not allow water or any other liquid to leak into the flashlight.
7. Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary
blindness.
8. Do not allow children to use the flashlight without your assistance.
The producer will not be liable for any harm done to the user if it was caused by
improper use of the product.
It is recommended to clean the threads and O-rings off dirt and old grease once or twice per year. Remember that reliable protection
from water and dust cannot be provided by worn out sealing. The fouling as well as lack of lubricant cause fast wear-out of threads and
sealing rings.
To clean the threads do the following:
1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).
2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged
replace it by a new one.
3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid to get inside the flashlight or tailcap as
it can cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.
In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required.
Prime
Magnet USB
Model
Prime C1 Pro Magnet USB
Prime C2 Pro Magnet USB
LED / Optics
Cree XP-L / TIR
Cree XHP35 / TIR
Brightness stabilization type
FULL (constant light)
Light output, LED / OTF lumens*
1050 / 970
2100 / 1700
Peak beam intensity, candelas
6770
9200
Hotspot / spill
20° / 80°
Beam distance*
165 meters
192 meters
Modes, light output (OTF lumens*)
and runtimes (measured with
18350 Li-Ion 900 mAh /
18650 Li-Ion 3400 mAh until the
light output drops to 10% of the
initial value)
Turbo2
970 lm / 30min
1700 lm / 1h
Turbo1
470 lm / 1h
950 lm / 1.7h
Main3
230 lm / 2.4h
420 lm / 4h
Main2
90 lm / 6.5h
180 lm / 10.5h
Main1
34 lm / 15h
35 lm / 50h
Firefly3
6 lm / 2.5d
6 lm / 12d
Firefly2
2.5 lm / 8d
1.7 lm / 40d
Firefly1
0.4 lm / 60d
0.15 lm / 200d
Strobe3
1Hz / 90 lm / 90h
1Hz / 180 lm / 52h
Strobe2
1Hz / 970 lm / 3.3h
1Hz / 1700 lm / 5h
Strobe1
10Hz / 970 lm / 1.7h
10Hz / 1700 lm / 2h
Power source
1x18350 Li-Ion
1x18650 Li-Ion
Size and weight (without batteries)
Length 91mm, body diameter 24.5mm, head
diameter 24.5mm, weight 58g
Length 122mm, body diameter 24.5mm,
head diameter 24.5mm, weight 62g
THE MOST TECHNICALLY ADVANCED
Service and Warranty
Armytek provides free warranty repair for 10 years (excluding batteries, chargers, switches and connectors which have 2 years
warranty) from the date of buy with the document confirming the purchase.
Guarantee does not extend to damage during:
1. Improper usage.
2. Attempts to modify or repair the flashlight by nonqualified specialists.
3. Longtime application in chlorinated or polluted water, or other liquids (other than water).
4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).
5. Usage of low-quality batteries.