Product Manual

4
4. Insert poles G, narrow end up, into A end of both A/B
assemblies. Insert set screw (S) into top of bars A,
securing in  nger-tight.
B
J
G
G
F
F
B
A
A
Front
Back
S
S
5. Place curved bar C on  at surface, nuts facing up.
Insert the labeled end of curved bar D into C (making
sure arrows meet). Repeat with the other bar D on the
opposite end of bar C. Insert set screw (S) into ends of
bars C, securing in  nger-tight.
7. Make sure cab frame is in the shape of a box, with
right angles (90°). Then tighten all the set screws (S),
except the set screws (S) on the crossbar (J), using the
enclosed Allen wrench.
CAUTION: Do not over tighten the set screws.
6. Place assembly D/C/D onto ends of poles G. Insert
set screw (S) at the bottom of poles D, securing in
 nger-tight.
D
D
C
S
S
D
D
J
G
C
F
B
G
B
F
S
S
90°
90°
Back
Front