Replacement Part List

BAF-112
645-79781
305 Manseld Ave.
Shelby, OH 44875
www.arnoldparts.com
MADE IN U.S.A.
TOOLS REQUIRED / HERRAMIENTAS REQUERIDAS:
Slotted Screwdriver
Destornillador ranurado
www.arnoldparts.com
CHECK OUT OUR ONLINE HOW-TO VIDEOS AND TAKE
THE GUESSWORK OUT OF EQUIPMENT MAINTENANCE!
¡CONOZCA NUESTROS VIDEOS DE INFORMACIÓN
PRÁCTICA EN LÍNEA Y LÍBRESE DE LAS DUDAS SOBRE
EL MANTENIMIENTO DEL EQUIPO!
AIR FILTER
FOR BRIGGS & STRATTON
VERTICAL SHAFT ENGINES
CAUTION:
Disconnect spark plug wire before working
on engine. Be certain engine is cold.
HOW TO INSTALL:
1. Remove screw or wing nut. Remove old foam lter
carefully to prevent dirt from entering carburetor.
2. Saturate new foam lter in engine oil.
3. Squeeze to remove excess oil.
4. Assemble parts – fasten to carburetor with screw.
5. Clean and oil every 25 hours under
normal conditions.
6. Reconnect spark plug wire.
FILTER SHOULD BE REPLACED EACH SEASON.
For more details, refer to the installation instructions
in your product owner’s manual.
FILTRO DE AIRE
PARA BRIGGS & STRATTON
MOTORES DE EJE VERTICAL
PRECAUCIÓN:
Desconecte el cable de bujía antes de trabajar en el motor.
Asegúrese de que el motor esté frío.
CÓMO INSTALAR:
1. Remueva el tornillo o tuerca mariposa. Desmonte cuidadosamente
el ltro de espuma viejo para evitar que la suciedad ingrese
al carburador.
2. Empape el ltro de espuma nuevo con aceite de motor.
3. Exprima para eliminar el exceso de aceite.
4. Ensamble las piezas – sujete al carburador mediante el tornillo.
5. Limpie y aplique aceite cada 25 horas bajo condiciones normales.
6. Reconecte el cable de la bujía.
EL FILTRO DEBE REEMPLAZARSE CADA TEMPORADA.
Para obtener más detalles, consulte las instrucciones
de instalación en su manual de usuario del producto.