Use and Care Manual

5
41
5
32
TO ASSEMBLE THE LID
Locate the lid handle. The screw
needed to assemble the lid handle
to the lid will be screwed into the lid
handle.
Using a Phillips-head screwdriver,
tighten the screw until the lid handle
is securely attached to the lid.
Place the screw beneath the lid so
that it ts correctly through the hole
in the lid and into the lid handle.
Place the lid handle on top of the lid,
so that it lines up with the hole in the
lid correctly.
Using a Phillips-head screwdriver,
unscrew the screw from the lid
handle.
The lid will require some assembly.