Use and Care Manual

8
Press the POWER ( ) button to
turn the kettle on and then press
the Keep Warm button. The Blue
Illumination Light will illuminate
and the kettle will begin heating
the water. As the water begins to
heat, the LED Display will show the
temperature in real time.
140
7 8
160
65
USING THE KEEP WARM TEMPERATURES (CONT.)
Pressing the + or – buttons
will increase or decrease the
temperature in 10 degree intervals
between 105 and 195 degrees.
Once the desired temperature
setting is reached, the Blue
Illumination Light will turn off and
stop heating. The kettle will heat
occasionally in order to maintain the
selected temperature.
Plug the Power Cord into a wall
outlet and place the kettle onto the
Power Base. The kettle will “beep”
once to indicate it is on.
• Donotuseabrasivecleanersorscouringpads.
• Donotimmersethekettlebodyorpowerbaseinwateratanytime.
NOTE