User`s manual

which is a stored value and transferred to the output terminals when a trigger occurs.

A pending triggered level is not affected by subsequent CURRent commands.

[SOURce:]CURRent[:LEVel]:TRIGgered[:AMPLitude]? [MIN|MAX]

This query checks and returns the presently programmed triggered current level. If no

triggered level is programmed, present CURRent value is returned.

CURRent:TRIGgered? Return the CURRent value or the set triggered current

level of the selected output

CURRent:TRIGgered? MAX Return the maximum programmable current value of

the selected output

CURRent:TRIGgered? MIN Return the minimum programmable current value of

the selected output

VOLTage[:LEVel][:IMMediate][:AMPLitude] {<voltage>|MIN|MAX}

This command directly programs the immediate output voltage level of the output

selected with the INST command.

[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]? [MIN|MAX]

This command checks and returns the immediate voltage value at the present output

terminals of the power supply or the maximum and minimum programmable voltage

levels of the selected output. For example:

VOLT? Query and return the immediate voltage value of the output

terminals

VOLT? MAX Query and return the maximum programmable voltage levels

of the output terminals

VOLT? MIN Query and return the minimum programmable voltage levels

of the output terminals

[SOURce:]VOLTage[:LEVel]:LIMit[:AMPLitude] {<voltage>|MIN|MAX|DEF}

This command is to set the maximum voltage limit value of the presently

programmed output selected with INST command.

[SOURce:]VOLTage[:LEVel]:LIMit[:AMPLitude]? {MIN|MAX|DEF}

This query returns the voltage limit level of the selected output, or the

maximum/minimum/default programmable voltage values of the selected output.

[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude] {<voltage>[MIN|MAX}

This command programs the pending triggered voltage level of the power supply,

which is a stored value and transferred to the output terminals when a trigger occurs.

A pending triggered level is not affected by subsequent VOLTage commands.