User's Manual

29
Output power is 577W, reflected power
reached abt. 40W and screen current
is abt. -20mA. Real antenna had
different impedance than real 50
Ohms.
We done M-TUNE to optimize PA
adjustment (press MENU, M-TUNE).
This is the result after manual
adjustment process. Output power
increased to 1 kW (driving still 16W),
Screen current is now abt. -19mA.
These parameters were SAVED.
In this segment of 20m band PA was adjusted for use with real antenna. Every time we used this
segment with this antenna, result will be very similar. Do this in every band / segment if using not
real 50 Ohm antenna.
We
We can see new small yellow window.
USER means that we used manual
tuning feature to optimize the PA
adjustment.
Now SWR is also visible (1.12). It is not
a bad SWR, it is mostly real SWR…..
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.