User's Manual

Exhibit 6 page 15 of 33
5.2.1. TCVR Support Settings
Supported transceivers: ICOM, ELECRAFT, KENWOOD, TEN-TEC , ORION, YAESU
Press SET button and scroll using UP / DWN to CHOOSE TCVR
Confirm CHOOSE TCVR by pressing SET again and scroll UP / DWN to your transceiver
type. Confirm the selection by pressing SET
Continue by selecting Baud Rate.
Press SET button and scroll using UP / DWN to BAUD RATE. Press SET again.
By scrolling UP / DWN select desired Baud Rate which must be the same as baud rate used
by your transceiver. (please refer to your transceiver user manual). To confirm your selection
press SET.
Baud rate for TCVR – PA communication
is shown on the LCD display.
Example of Automatic mode with ICOM
TCVR.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.