Instruction manual

19
4.3 Changing the Optic
For exchanging the optic between academy and silent
format, it is necessary to take the view finder system off
the camera in order to remove the CCD optic module.
The following tools are necessary:
3 mm allen key
2.5 mm allen key
1.5 mm allen key.
Disconnect camera of all power supplies.
Support the viewfinder system.
Do not touch optic surfaces.
All lenses must be clean.
Do not use force.
a) Take the view finder system off the camera by loosening
the three mounting screws §.
b) Remove the CCD optic module by opening the three
screws §.
c) Remove the cap, which is located at the end of the
module § by twisting it counter clockwise to
get acess to the alignement screws.
•3 screws
3 screws •
cap •
Setup