User Manual

106 Camera Controls
Lens
squeeze fac-
tor
Select to set the squeeze factor of the lens that is in use. This
value is written into the metadata of the clip and allows video
players and editing software to automatically unsqueeze clips
that have been shot with anamorphic lenses.
Note: Fixed to 1.0 for recording resolutions that record de-
squeezed images to prevent double de-squeezing.
Production
info
Select to open the PRODUCTION INFO screen where the user
can enter metadata information specific to the production.
NOTICE
•
ARRI recommends to set the value of Next reel count to 001 at the beginning of
a shoot.
•
When the current reel count is 999, the reel count reverts to 001 for the next
media that is formatted.
•
When changing the camera index on a card that already contains clips, the
clip counter is not reset to 1 but is incremented from the last clip of the last
recording.
Production Info
The PRODUCTION INFO screen has fields to enter metadata information specific
to the production. The user can enter the names of the director, cinematographer,
location, production, scene and take. Two additional fields allow to enter other data.
Production Enter the name of the production
Prod. Company Enter the name of the production company
Director Enter the name of the director
Cinematographer Enter the name of the cinematographer
Camera Operator Enter the name of the camera operator
Location Enter the name of the location
Scene Enter the name/number of the scene
Take Enter the name/number of the take
User Info 1 Enter other info
User Info 2 Enter other info