User Manual

112 Camera Controls
Test tone Select to activate a 1 kHz audio test
tone on all channels when color bar is
active.
Note: Test tone is only active when au-
dio recording is on and possible.
Test tone level Select to set the level of the audio test
tone to 0 dbFS, -9 dBFS or -18 dBFS.
Note: Switching on the color bars the first time after camera bootup may take a few
seconds.
Display + Beeper
Display brightness Select to adjust the brightness of the LCD display on
the camera-right side. To adjust the display brightness
when the HOME screen is displayed, press and hold the
BACK button while rotating the jogwheel.
Button brightness Select to adjust the brightness of the button illumination.
Run beeper mode Select to set the Run beeper mode to:
•
Off
•
Start
•
Stop
•
Start+Stop
System Time + Date