User Manual

ALEXA SXT Plus 149
► Press CALIBRATE to start calibration of the selected motor.
► Press CAL. ALL to start calibration of all motors simultaneously.
► Press DIRECTION to toggle motor direction between Left and Right.
► Press TEETH to toggle motor teeth count between:
°
Auto (detected teeth count in brackets)
°
40t
°
50t
°
60t
► Press +1 or -1 to adjust motor torque.
3D Lens Sync
When two cameras are connected and their sensors are synced with via the EXT
connectors, the slave camera will receive its motor commands from the master
camera. Its radio module switches automatically off. Calibration of lens motors must
happen individually for each camera.