User Manual

ALEXA SXT W 153
16.2.2 Status LEDs
LED Status
Network
•
Solid: Connection is established
•
Normal blinking: Device is in listen mode
•
Fast blinking: During link setup mode (very short period)
•
Fast blinking: During registration (pairing button was
pressed)
•
Very fast blinking: System error
Video
•
Solid: Video signal is established and locked in
•
Normal blinking: Video source is not supported
•
Very fast blinking: System error
Power Shows if wireless video device is powered
16.2.3 Pairing camera and receivers
To transmit video content from the camera to a WVR-1 or Transvideo Starlite
ARRI-WVS, it is necessary to pair the devices. Pairing describes the function of
connecting a transmitter to one or more receivers. The pairing needs to be confirmed
at both devices with the push of the PAIR button. The pairing process is accompanied
by a specific pattern of indicators through LEDs blinking on the devices.
Precondition:
► Select MENU > MONITORING > MON OUT 3 / WIRELESS VIDEO and ensure
that Wireless video power is set to On.