User Manual

172 Remote Control Unit RCU-4
18 Remote Control Unit RCU-4
The camera can be remotely controlled with an RCU-4. This device mirrors the
controls on the camera's right side. It is connected to the camera's Ethernet port.
Power is supplied via the Ethernet cable.
To power the RCU-4, connect it to a camera, make sure the camera is powered up,
and press the power button.
During boot-up, the RCU-4 compares its firmware version with the camera firmware
version. If it detects a difference, it will update itself to match the camera's firmware
version. When the update is completed, the RCU-4 will shut down automatically.
The power button of the RCU-4 only affects the RCU-4. It is not possible to power or
to shut down the camera with the RCU-4. When the camera is powered down, the
RCU-4 shuts down automatically as it loses its power supply.
The LOCK button of the RCU-4 locks only the RCU-4. It does not affect the camera
lock.
For more information, please refer to the RCU-4 user manual.