User Manual
30 Camera Support
9 Camera Support
9.1 Minimum Equipment Recommended For
Operation
•
ALEXA SXT EV camera body and Lens Adapter PL mount
•
Electronic Viewfinder EVF-1
•
Viewfinder Mounting Bracket
•
KC 150-S Viewfinder Cable short 0.35m/1.2ft
•
CCH-1 Center Camera Handle
•
BP-12 Bridge Plate with base plate, or BPA-1 with BP-5/BP-8 Bridge Plate and
base plate, or WA-1 Wedge Adapter and Quick Release HD Baseplate
•
SD card
•
Compatible power supply
•
Suitable media for recording
9.2 Tripod and Remote Heads
Tripod and remote heads must have adequate load ratings to support the ALEXA and
attached accessories. See the dimensional drawings and weights for your camera
model in the Appendix of the manual.
NOTICE
Always check the payload limits of a remote head and crane before mounting a
camera.
In applications where the camera mount is subject to high forces (e.g. car or helicopter
mounts) the camera must be additionally secured with appropriate safety restraints. All
mount screws must be tightened firmly with an appropriate screwdriver (not with the
commonly used coin!).
9.3 Electronic Viewfinder EVF-1