User Manual

32 Camera Support
Fig. 5: EVF cables: KC-150S (center), KC-151S (middle), KC-152S (outer)
9.3.2 Viewfinder Mounting Bracket
The Viewfinder Mounting Bracket VMB-3 is attached to the camera using two captive
3mm hex socket head screws on top of the camera at the front. The VMB-3 features a
leveling bubble and two internally threaded 15mm rods with standard 60mm distance.
These can be exchanged for or extended with standard 15mm rods for mounting
matte boxes, lens motors and the like above the lens if need be.
Attach the EVF-1 to the Viewfinder Mounting Bracket by sliding the dove tail into the
receptacle and closing the lever on the EVF-1.
The position of the EVF-1 can be adjusted by loosening the levers on the Viewfinder
Mounting Bracket, adjusting the position as desired and closing the levers to retighten.
The EVF-1 can be mounted on the camera-right side by unscrewing the threaded end
cap on the side-to-side adjustment rod, removing the rod itself and inserting it from the
other side. Remember to reattach the threaded end cap.
NOTICE
Camera-right operation is not possible with the standard EVF cable KC-150-S.
Instead, the longer cable KC-151-S is needed.