User Manual

Camera Support 35
9.5 Side Camera Handle SCH-1
The Side Camera Handle SCH-1 is used in conjunction with a BAT-V or BAT-G top-
mounting battery adapter, or with third-party onboard recorders. It is attached to the
camera using three captive 3mm hex socket head screws (two at the front and one
at the back). Ensure that the SCH-1 is securely fastened before attempting to lift the
camera.
If a tall battery or a tall third-party onboard recorder is used, the adjustable center grip
of the SCH-1 can be replaced by the taller Adjustable Center Grip Tall (ACG-2).
Fig. 8: SCH-1
9.6 Bridge Plates BP-12/BP-13
The bridge plate BP-12 for 19 mm studio rods has been specifically developed for
ALEXA. It mounts directly to the camera body using two 3/8"/16 screws and ensures
that support rods, matte boxes and follow focus units are positioned properly in
regards to the optical center of the camera, just like all other ARRI cameras.
The bridge plate BP-13 is equivalent to the BP-12, but for 15 mm studio rods.