User Manual

42 Connectors
NOTICE
•
Keep the SD card slot door closed to prevent dirt and moisture from entering
the camera.
•
After booting the camera or inserting an SD card, it might take some seconds
until the SD card is recognized and usable.
The SD card can be formatted on the ALEXA or the following folder structure can be
created manually on a computer. The SD card must be properly formatted prior to its
first use.
Fig. 15: Folder structure required for SD card
To format an SD card on the ALEXA:
1. Press the MENU button.
2. Using the jogwheel, select System.
3. Select SD Card.
4. Select Format + prepare SD card.
5. Press both FORMAT buttons simultaneously. The ALEXA will create the required
folder structure on the SD card after formatting.
NOTICE
Formatting the SD card will irreversibly remove all data on the SD card.
To create the required folder structure on the SD card in the ALEXA
without formatting:
1. Press the MENU button.
2. Using the jogwheel, select System.
3. Select SD Card.
4. Select Prepare SD card. The ALEXA will create the required folder structure on
the SD card without formatting or deleting any data.
NOTICE
Firmware update files are recognized by the camera anywhere within the structure,
but it is recommended to copy them into the Firmware folder.