User Manual

60 In-Camera Filter Module IFM-1
9. Fasten the lens lock, still in position OPEN (2), back to the PL mount; use two of
the six torx screws (1) hand-tight:
10. Turn the lens lock into Position CLOSED (2) and fasten the other four torx screws
hand-tight (1). Check if all screws and the shim fit correctly:
11. Before mounting a lens, always check its mounting depth (see "Safety instructions
for in-camera filtration", page 51 and "Maximum lens mounting depth",
page 51)
NOTICE
Make sure the LDS connection between lens and camera’s PL mount works
properly. If not, add more washers (see step 6).